VCI Liquid GVL800-B TDS

VCI Liquid GVL800-B TDS

GreenVCI® GVL800-B represents an inventive volatile corrosion inhibitor renowned for its scale protection and temporary corrosion protection capabilities for both ferrous and non-ferrous metals. Tailored to deliver temporary corrosion protection from chlorides in saltwater environments, it emerges as an optimal choice for applications such as hydrostatic tests of heat exchangers, diverse piping facilities, boilers, and pipes.

Method of Application

Upon application, GVL800-B establishes a protective layer against corrosion and scale formation. Its user-friendly nature allows for seamless application with a range of equipment, including conventional spray guns, automated industrial spray machines, and similar apparatus. Before application, ensure proper preparation of metal surfaces by removing oil, grease, and minor rust.

Application Field

GVL800-B can be used in various applications such as mothballing, hydrostatic test and leaking test additives, storage tanks and tubular structures like pipes and turbines.

VCI Functional Challenge

  • USA Department of Defense test method VCI standard
  • [MIL-STD-3010 Method 4031] Vapor Inhibitor Ability (VIA) compliant
  • Climate Chamber Corrosivity (3 Cycles) compliant
  • 1 Cycle = [(50 +/-2)°C * (97+/-3) % RH*16hr & Room temperature * 8hr]
  • “Green” VCI raw materials
  • 99% Biodegradable (KS I ISO 7827)
  • Water soluble
  • 100% No secondary amines
  • 100% No nitrite
  • TRGS 615 & REACH (SVHC) compliant
  • RoHS compliant
  • Easy to apply
  • VCI action protects deep cavities or voids, and the monomolecular layer does not interfere with electrical operation or equipment
  • Little or no surface preparation is required and easily removed by rinsing with water
  • Efficient hydrolysis rate

Dosage

GVL800-B delivers outstanding protection, providing a corrosion protection period of 6 months when properly air-sealed. For hydrostatic tests or leaking tests, it should be blended with salt water within the range of 0.2 – 0.5% of volume. For overall scale and corrosion protection, a concentration of 300 – 1,000 ppm of GVL800-B is recommended. The quantity of GVL800-B needed will vary based on the metal surface area and capacity.

Metal Protection

GVL800-B delivers short-term protection against corrosion and scale protection for both ferrous and non-ferrous metals exposed to saltwater environments.

Typical Properties

Appearance: Clear to light yellow

pH: Over 6.5 – 6.8

Vap. Pressure: 0.01 – 0.4mmHg

Specific Gravity: 1.02 – 1.05

Solubility: Water-soluble

Customisation

Custom VCI liquid options are also available, including but not limited to changes to performance, pH, colour, metal protection and anti-static.

Packaging and Storage

GVL800-B is offered in various packaging options, including 20L pails, 200L drums, and 1,000L IBC tanks, ensuring adaptability to your specific requirements. With proper handling, the product boasts an estimated shelf life of two years when delivered in sealed packaging and shielded from direct sunlight and moisture. Maintaining storage conditions at room temperature is crucial to preserve the effectiveness of the VCI liquid packaging over time.

Precautions

To guarantee the efficacy of VCI liquid packaging, adherence to specific guidelines is paramount. Firstly, it’s advisable to store the packaged products away from direct sunlight, high temperatures, heat, and moisture. Additionally, the application of VCI liquid packaging should occur in environments with stable temperature conditions.

Controlling humidity levels is also crucial to safeguard the packaged products from corrosion. Before usage, conducting testing is recommended to confirm that the VCI liquid is suitable for your specific requirements and conditions. By diligently following these steps, you can optimize the protection provided by VCI liquid for your metal products.

FOR INDUSTRIAL USE ONLY: Keep Out of Reach of Children

WARNING: This product is intended for industrial use only and should not be consumed. Store it at room temperature in a low-humidity environment.

IMPORTANT INFORMATION: For additional information on product safety, please request a Material Safety Data Sheet from our employees.

LIMITED WARRANTY

Please note that the information in this product overview is a guide and the physical properties listed are typical values only. Before using the product, we recommend testing it to ensure it meets your needs. Our products are designed for a variety of conditions and uses, which we may not be able to control. We do not guarantee that this product is suitable for any particular use. Claims for defects in the product must be made in writing within two months of receiving the product and before further processing or combining it with other materials. We will not be held responsible for any damages that occur during use. This warranty is the only warranty we offer, express or implied, and no one is authorized to offer any other warranties on our behalf.

 

MEASURE

DESIGN

SECURE

PROTECT

AXIS provides a free, no obligation, measure and quote

X
Request Quote
CONTACT US!

Interested in our products and services, please fill out the form below:

    Project Partners