VCI Powder GVP100-B TDS

VCI Powder GVP100-B TDS

GreenVCI® GVP100-B is an eco-friendly corrosion inhibitor designed to safeguard both ferrous and non-ferrous metals from rust and corrosion, as well as scale buildup. Operating by creating a thin protective layer on the metal surface, it effectively shields against oxidization for up to 2 years, enduring in both wet and dry conditions, including saltwater environments.

Typical Properties

  • Off-white powder appearance
  • 6.5-7 pH (1% aqueous)
  • 0.01-0.4mmHg vap. pressure
  • Water soluble

VCI Functional Excellence

  • VCI Powder MIL-I-22110C performance specifications for packaging materials:
  • [MIL-STD-3010 Method 4031] Vapor Inhibitor Ability (VIA) compliant
  • [MIL-STD-3010 Method 3005] Contact corrosivity compliant
  • [MIL-I-22110C] Compatibility with copper
  • Climate Chamber Corrosivity (3 Cycles) compliant
  • 1 Cycle = [(50 +/-2)°C * (97+/-3) % RH*16hr & Room temperature * 8hr]
  • VIA Compliance Standard
  • NACE TM0208-2018
  • TL 8135-0043
  • “Green” VCI raw materials
  • Readily biodegradable VCI raw materials
  • Water soluble
  • 100% No secondary amines
  • 100% No nitrite
  • TRGS 615 & REACH (SVHC) compliant
  • RoHS compliant

 

Dosage

  • 100g per cubic meter vapour space
  • 0.05% to 0.2% corrosion protection
  • Closed loop cooling systems: 0.05% to 0.2%
  • Sea water: 0.2% to 0.5% for leaking and hydrostatic tests
  • Leaking and hydrostatic tests: 0.2% to 0.3%, or 0.2% to 0.5% with seawater.

Method of Application

  • Ensure the surface is clean by eliminating any oil, grease, and minor rust spots.
  • Apply the VCI powder evenly using methods such as an air gun, dusting, fogging, or sprinkling.
  • After application, seal the item to prevent airflow and safeguard the item with the VCI layer.
  • To remove the powder, simply utilize a low-pressure air gun or rinse it with water, without the need for complicated processes.

Application Field

GVP100-B is engineered to deter scaling and inhibit corrosion during the hydrostatic testing of heat exchangers, pipes, and boilers.

Customisation

Customisable VCI powder options are available, which include adjustments to performance, pH levels, selective protection for ferrous or non-ferrous metals, adherence to specific industrial VIA standards, and more.

Packaging and Storage

Packaging options for VCI powder are available in various sizes, including 10kg pails, 25kg woven kraft bags, or sachets ranging from 2.5g to 100g, ensuring adaptability to your specific requirements. When delivered in sealed packaging and shielded from direct sunlight and moisture, the product maintains an estimated shelf life of two years. Proper storage at room temperature is essential to uphold the effectiveness of the VCI powder packaging over time.

Precautions

To guarantee the efficacy of VCI masterbatch packaging, adherence to specific guidelines is paramount. Firstly, it’s advisable to store the packaged products away from direct sunlight, high temperatures, heat, and moisture. Additionally, the application of VCI liquid packaging should occur in environments with stable temperature conditions.

Controlling humidity levels is also crucial to safeguard the packaged products from corrosion. Before usage, conducting testing is recommended to confirm that the VCI liquid is suitable for your specific requirements and conditions. By diligently following these steps, you can optimize the protection provided by VCI liquid for your metal products.

FOR INDUSTRIAL USE ONLY: Keep Out of Reach of Children

WARNING: This product is intended for industrial use only and should not be consumed. Store it at room temperature in a low-humidity environment.

IMPORTANT INFORMATION: For additional information on product safety, please request a Material Safety Data Sheet from our employees.

LIMITED WARRANTY

Please note that the information in this product overview is a guide and the physical properties listed are typical values only. Before using the product, we recommend testing it to ensure it meets your needs. Our products are designed for a variety of conditions and uses, which we may not be able to control. We do not guarantee that this product is suitable for any particular use. Claims for defects in the product must be made in writing within two months of receiving the product and before further processing or combining it with other materials. We will not be held responsible for any damages that occur during use. This warranty is the only warranty we offer, express or implied, and no one is authorized to offer any other warranties on our behalf.

MEASURE

DESIGN

SECURE

PROTECT

AXIS provides a free, no obligation, measure and quote

X
Request Quote
CONTACT US!

Interested in our products and services, please fill out the form below:

    Project Partners